Lincoln K2382-5 Ranger® 250 GXT Stainless Steel Case (Kohler®) w/ Electric Fuel Pump

$ 9,459.00
By Lincoln Electric
View details

Lincoln K2382-5 Ranger® 250 GXT Stainless Steel Case (Kohler®) w/ Electric Fuel Pump

 

 

EXTRA POWER, EXTRA PERFORMANCE

 

Get all the XTras needed for construction and maintenance work. That's XTra welding performance with 250 amps for AC or DC Stick and DC wire welding and XTra power with up to 11,000 watts peak for lights, grinders or high amperage equipment. You also get XTra protection and quiet operation with the Lincoln enclosed case. 

 

Features & Benefits:

 

TOTALLY ENCLOSED CASE

  • Engine is fully protected
  • 3 service access doors
  • Low Noise - 76.4 dBA sound level at 23 ft (7 m) 100.7 dB sound power (Lwa) at rated output
  • Choose from painted, camo wrapped, or stainless steel roof, case sides and engine doors

 

VERSATILE AC/DC WELDING

  • AC/DC welding output for a broad range of stick electrode types
  • Excellent AC TIG welding with optional TIG module and either a foot or hand Amptrol™ for aluminum and other alloy welding
  • MIG and Flux-Cored capable (with optional equipment)
  • Remote ready! 6-pin connector and local/remote switch for remote control operation

 

11,000 WATTS PEAK SINGLE-PHASE AC GENERATOR POWER

  • Peak for motor starting
  • 10,000 watts continuous power for generator, plasma cutter or inverter welder
  • Lights, grinder, power tools

 

23 HP KOHLER® GASOLINE ENGINE

  • 2 cylinder, 4 cycle overhead valve air-cooled design 
  • Electric fuel pump avoids vapor lock
  • Oil drain extension for easy oil changes
  • 12 gallon tank for extended run times
  • Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling

 

RUGGED RELIABILITY

  • Welding and AC Generator Outputs Rated at 104°F (40°C)

 

Specifications:

 

RATED OUTPUT
  • 250A AC/25V/100%
  • 250A DC/25V/100%
OUTPUT RANGE 50-250A AC/DC
GENERATOR OUTPUT 11,000 watts peak, 10,000 watts continuous
TYPE OF ENGINE Kohler OHV Command CH730
HP AND SPEED 23@3600
CYLINDERS 2
DIMENSIONS (H X W X D) 29.9" x 21.5" x 42.3" (759 x 546 x 1074 mm)
NET WEIGHT 602 lbs (273.07 kg)

 

Key Controls:

 

 

  1. Electric Fuel Gauge and Engine Hour Meter
  2. 6 Position Output Range Selector
  3. Circuit Breakers
  4. 120 Volt AC Receptacles (NEMA 5-20R)
  5. Output Stud Covers
  6. Ground stud 
  7. 120/240 Volt AC Full KVA Receptacle (NEMA 14-50R)
  8. 6-Pin Remote Connector 
  9. Local/Remote Switch 
  10. Polarity Switch 
  11. Fine Output Control 
  12. Engine Choke Control (Stainless Steel Cable)
  13. Engine Start Switch with Idler Control 

 

Accessories:

 

CATEGORY PRODUCT NUMBER PRODUCT NAME
General K3494-1 Lincoln Kohler® Tune Up Kit (CH23S/CH730/ECH740)
General K4268-1 Lincoln Remote Output Control with 120V AC Receptacles - 125 ft
General K4330-1 Lincoln Remote Output Control - 125 ft
General K802N Lincoln Power Plug Kit (20 Amp)
General K1816-1 Lincoln Full-KVA Adapter Kit
General K1690-1 Lincoln GFCI Receptacle Kit
General K1898-1 Lincoln Spark Arrester Kit
General K886-2 Lincoln Large Canvas Cover
General K1737-1 Lincoln All Terrain Undercarriage
General K1770-1 Lincoln Factory Undercarriage
General K1745-1 Lincoln Welding Gas Cylinder, LPG Tank Holder
General K2635-1 Lincoln Small Two-Wheel Road Trailer with Duo-Hitch
General K2639-1 Lincoln Fender and Light Kit
General K2640-1 Lincoln Cable Rack
Stick K704 Lincoln Accessory Kit - 400 Amp
Stick K875 Lincoln Accessory Kit - 150 Amp
Stick K857 Lincoln Remote Output Control - 25 ft
Stick K857-1 Lincoln Remote Output Control - 100 ft 
TIG K1783-4 Lincoln PTA-26 TIG Torch (25 ft, 2 PC)
TIG KP509 Lincoln PTA-26 and PTW-18 TIG Torch Consumable Kit
TIG K930-2 Lincoln TIG Module
TIG K936-3 Lincoln Control Cable for TIG Module
TIG K937-45 Lincoln TIG Module Control Cable Extension
TIG K870 Lincoln Foot Amptrol - 25 ft
TIG K963-3 Lincoln Hand Amptrol™ Rotary Track Style, 6 Pin (25 ft)
TIG K938-1 Lincoln Contactor Kit
TIG K939-1 Lincoln TIG Module Docking Kit
Plasma Cutter K2808-1 Lincoln Tomahawk 1000 Plasma Cutter

 

Wire Feeders:

 

PRODUCT NUMBER PRODUCT NAME
K3269-1 Lincoln Magnum Pro 100SG Spool Gun
K2473-1 Lincoln Power MIG 180C MIG Welder