- $0.00 to $500.00
- $501.00 to $1,000.00
- $1,001.00 to $2,000.00
- $2,001.00 to $3,000.00
- $3,001.00 to $4,000.00
- $4,001.00 to $5,000.00
- $5,001.00 to $10,000.00
- $10,001.00 to $20,000.00
|
| | |
|
| |
| | |
|
|
Ranger 250 LPG One-Pak (LIN K2371-2)
|
|
Item Number: LIN K2371-2
Manufacturer Part No: K2371-2
|
The Ranger 250 LPG is ready for a workout all day, everyday! Intended for use in environments where gasoline and diesel emissions are unacceptable. This tough Lincoln LPG (liquid propane gas) fuel welder/generator delivers 250 amps for welding at 100% duty cycle. The Ranger 250 LPG is recommended for stick welding, including a separate, dedicated downhill pipe mode, as well as Touch-Start DC TIG, flux-cored and MIG wire welding and arc gouging. Lincoln Chopper Technology provides easy starts, an extremely smooth arc, low spatter and outstanding bead appearance. The sleek, enclosed case lowers noise and protects critical engine components. Hot looks, hot features, hot performance Thats the Ranger 250 LPG!
Now with 10,000 watts of peak AC generator power and 9,000 watts of continuous power. Use peak power for starting and running motors. The 9,000 watts of continuous power also makes this a versatile product for a Lincoln plasma cutter, Lincoln inverter, lights, tools or emergency power.
LPG Engine Driven Welder
- A powerful 250 amp DC CC/CV LPG engine driven welder. All rated outputs at 100% duty cycle 104F (40C).
25 HP Kohler LPG Engine
- Increase from 20 HP to 25 HP.
- 2-cylinder, 4-cycle OHV (overhead valve) air-cooled.
Multi-Process Welding
- Excellent DC multi-process welding for general purpose stick, downhill pipe (stick), TIG, cored-wire, MIG (CO2 and blended gas) and arc gouging with carbons up to 3/16" in diameter.
Superior Arc Performance
- Lincoln's Chopper Technology provides easy starts, a smooth arc, low spatter and excellent bead appearance.
10,000 Watts Peak Single-Phase AC Generator Power
- 1,000 watts more!
- Use peak power for motor starting.
9,000 Watts Continuous Single-Phase AC Generator Power
- 1,000 watts more!
- For high capacity needs such as back-up generator, powering a Pro-Cut plasma cutter, or Invertec inverter welder.
- Also for lights, a grinder or other power tools.
Skewed Rotor Design
- Skewed rotor design provides AC power suitable for operating Lincoln Pro-Cut plasma cutters and inverter power sources. Lincoln was first in the welding industry with this feature.
Three-Year Warranty
- Three-year Lincoln warranty (parts and labor) on welder. (Engine is warranted separately by the engine manufacturer).
Weight:482 lbs. (218 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073
|
|
|
|
| Processes
|
|
Stick, TIG, MIG, Flux-Cored, Gouging
|
| Unit Includes
|
|
Ranger 250 LPG, Factory Undercarriage (K1770-1), Gas Cylinder Holder (K1745-1), LPG Tank Holder (K2361-1), Accessory Kit (K704) and six 10 lb. Easy Open Cans of 1/8" Excalibur 7018 (ED028482) stick electrode. Assembly required.
|
|
Welding Specifications
| Rated CC DC Output Amps/Volts/Duty Cycle |
Rated CV Output Amps/Volts/Duty Cycle |
Output Range |
| 250/28/100%
|
250/28/100%
275/27/60%
|
20-250A DC
40-250A Pipe
20-250A TIG
14-28V CV
|
Engine Specifications
| Type of Engine |
Cylinders |
HP & Speed (rpm) |
Generator Output |
Fuel Type |
| Kohler OHV Command CH730 LPG
|
2
|
25@3600
|
10000 watts peak
9000 watts continuous
|
LPG
|
|
|
|
MSRP: $112.00
Price: $107.78
You Save: $4.22 (4 %)
For stick welding. Includes 20 ft. (6.1m) #6 electrode cable with lug, 15 ft. (4.6m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode.
|
MSRP: $548.00
Price: $527.35
You Save: $20.65 (4 %)
For stick welding. Includes 35 ft. (10.7m) 2/0 electrode cable with lug, 30 ft. (9.1m) 2/0 work cable with lugs, headshield, filter plate, work clamp and electrode holder.
|
MSRP: $149.00
Price: $143.70
You Save: $5.30 (4 %)
Holds two 100 ft. lengths of 2/0 cable. Includes holder tray for electrodes or miscellaneous items. For use with K1737-1 and K1770-1.
|
MSRP: $115.00
Price: $110.34
You Save: $4.66 (4 %)
Protect your machine when not in use. Made from attractive red canvas that is flame retardant, mildew resistant and water repellent.
|
MSRP: $330.00
Price: $296.39
You Save: $33.61 (10 %)
Required for connection of SG Control Module (K488) to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0m). For Lincoln engine driven power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and lug power
|
MSRP: $40.00
Price: $38.49
You Save: $1.51 (4 %)
Drive Roll and Guide Tube Kit for feeding .035 (0.9 mm) cored wire.
|
MSRP: $36.00
Price: $34.64
You Save: $1.36 (4 %)
Drive Roll and Guide Tube Kit for feeding .035 (0.9 mm) solid wire.
|
MSRP: $48.00
Price: $46.19
You Save: $1.81 (4 %)
Attaches between muffler and exhaust elbow.
|
|
MSRP: $303.00
Price: $291.26
You Save: $11.74 (4 %)
Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the Afterflow cycle.
|
MSRP: $160.00
Price: $153.97
You Save: $6.03 (4 %)
Holds welding gas. Use one or two holders with K1770-1 undercarriage.
|
MSRP: $39.00
Price: $37.21
You Save: $1.79 (5 %)
Gun receiver bushing for the following guns: Magnum 200, 300 and 400 gun and cable assemblies with K466-1 connector kit. Lincoln Innershield gun and cable assembly. Fast-Mate gun and cable assembly with K489-2 Fast-Mate Adapter Kit. Magnum 550 gun and cab
|
MSRP: $245.00
Price: $236.09
You Save: $8.91 (4 %)
Provides 25 ft (7.6m) of remote current control for TIG welding. (6-pin plug connection).
|
|
MSRP: $336.00
Price: $215.57
You Save: $120.43 (36 %)
This popular Magnum gun is intended for most .035.045 wire diameter applications in job shops, production or manufacturing. Standard equipment on the current Lincoln Power MIG 350MP wire feeder/welder.
|
MSRP: $202.00
Price: $129.59
You Save: $72.41 (36 %)
This popular Magnum gun is intended for most .035.045 wire diameter applications in job shops, production or manufacturing. Standard equipment on the current Lincoln Power MIG 350MP wire feeder/welder.
|
MSRP: $626.00
Price: $562.00
You Save: $64.00 (10 %)
Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor.
|
MSRP: $708.00
Price: $681.32
You Save: $26.68 (4 %)
The Magnum SG a lightweight, well balanced semiautomatic spool gun designed for easy and reliable aluminum wire feeding with a variety of CV power sources and engine-driven welders. Rated 250 amps @ 60%, the Magnum SG features a generous 25 ft (7.5 m)
|
MSRP: $83.40
Price: $53.51
You Save: $29.89 (36 %)
Magnum Parts Kits provide all the torch accessories you need to start welding. Parts Kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box. For PTW-18 and
|
MSRP: $2,348.00
Price: $2,295.47
You Save: $52.53 (2 %)
The Precision TIG 225 gives you the 'Power to Perform', for general fabrication, automotive/motorsports, vocational schools or serious hobby work. Micro-Start II Technology delivers precision arc performance to improve arc starting, welding and weld cra
|
MSRP: $2,990.00
Price: $2,922.91
You Save: $67.09 (2 %)
The Pro-Cut 55 is your top choice for industrial plasma cutting for HVAC, sheetmetal and light plate fabrication metalworking applications. Packed with patented features, the compact Pro-Cut generates 60 amps of cutting power capable of cutting conductive
|
MSRP: $58.00
Price: $37.21
You Save: $20.79 (36 %)
Gun connector kit for Lincoln 10 series wire feeders.
|
MSRP: $196.00
Price: $188.61
You Save: $7.39 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
|
MSRP: $265.00
Price: $255.34
You Save: $9.66 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.
|
MSRP: $835.00
Price: $803.22
You Save: $31.78 (4 %)
Remote weld output control box with two 120V AC receptacles having GFCI (ground fault circuit interrupter) protection. One cord for both remote and power. 100 ft. (30.5 m) length. Permits remote adjustment of weld output and power for tools (such as a gri
| | |
Product Reviews
|
|
|