- $0.00 to $500.00
- $501.00 to $1,000.00
- $1,001.00 to $2,000.00
- $2,001.00 to $3,000.00
- $3,001.00 to $4,000.00
- $4,001.00 to $5,000.00
- $5,001.00 to $10,000.00
- $10,001.00 to $20,000.00
|
| | |
|
| |
| | |
|
|
Welders > Welders > Lincoln Ranger 250 GXT (w/Electric Fuel Pump) (LIN K2382-4)
Lincoln Ranger 250 GXT (w/Electric Fuel Pump) (LIN K2382-4)
|
|
MSRP: $4,315.00
Price: $4,218.84
You Save: $96.16 (2 %)
Item Number: LIN K2382-4
Manufacturer: Lincoln Electric
Manufacturer Part No: K2382-4
|
Why settle for less, when you can get more? The Ranger 250 GXT has all of the Xtras you need for construction and maintenance work. This Ranger delivers XTra welding performance with 250 amps for AC or DC stick and wire welding. And, it's remote-ready for extended amperage control or AC TIG welding on aluminum with Lincolns optional TIG module.
The Ranger 250 GXT generates XTra power, up to 11,000 watts peak, for lights, grinders and high amperage equipment such as Lincolns Pro-Cut 55 plasma cutter. With the exclusive Lincoln enclosed case, you get XTra protection and XTra quiet operation. With the Ranger 250 GXT, you get XTra value, without paying more.
XTra Performance!
Rated 250 amps/25 volts for AC, DC and CV. All rated outputs at 100% duty cycle 104°F (40C).
Smooth AC/DC welding output for a broad range of stick electrodes, such as Lincoln® Excalibur 7018 MR (AWS E7018) and Fleetweld 5P+ (AWS E6010). Also capable of MIG, flux-cored, and TIG welding.
Remote ready! 6-pin connector and local/remote switch for remote control operation. Also for AC/DC TIG Module use with foot or hand Amptrol.
Electric fuel gauge located on control panel makes it easy to check the fuel level during operation and refueling. Helps you virtually eliminate running low on fuel during critical jobs.
XTra Power!
11,000 Watts Peak Single-Phase AC Generator Power
- Most peak power in its class.
- Use peak power for motor starting.
10,000 Watts Continuous Single-Phase AC Generator Power
- Most continuous power in its class.
- For high capacity needs such as a back-up generator, powering a Pro-Cut plasma cutter or an Invertec inverter welder.
- For lights, a grinder or other power tools.
XTra Protection!
Engine doors provide protection and easy service access.
Low noise at 76.4 dBA at 23 ft./7 m (100.7 dB Lwa).
Rugged Reliability Rangers have been subjected to an extensive testing program to ensure reliable operation in a wide variety of environmental conditions.
Three-year Lincoln warranty on welder (engine is warranted separately by the manufacturer).
Weight:602 lbs. (273 kgs. )
Dimensions (in) H x W x D : 36.2 x 21.5 x 42.3
Dimensions (mm) H x W x D : 920 x 546 x 1073
|
|
|
|
| Processes
|
|
Stick, TIG, MIG, Flux-Cored, Gouging
|
|
Welding Specifications
| Rated CC AC Output Amps/Volts/Duty Cycle |
Rated CC DC Output Amps/Volts/Duty Cycle |
Rated CV Output Amps/Volts/Duty Cycle |
Output Range |
| 250/25/100%
|
250/25/100%
|
250/25/100%
|
50-250A AC/DC
|
Engine Specifications
| Type of Engine |
Cylinders |
HP & Speed (rpm) |
Generator Output |
Fuel Type |
| Kohler OHV Command CH23S
|
2
|
23@3600
|
11000 watts peak
10000 watts continuous
|
Gas
|
|
|
|
MSRP: $112.00
Price: $107.78
You Save: $4.22 (4 %)
For stick welding. Includes 20 ft. (6.1m) #6 electrode cable with lug, 15 ft. (4.6m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode.
|
MSRP: $548.00
Price: $527.35
You Save: $20.65 (4 %)
For stick welding. Includes 35 ft. (10.7m) 2/0 electrode cable with lug, 30 ft. (9.1m) 2/0 work cable with lugs, headshield, filter plate, work clamp and electrode holder.
|
|
MSRP: $149.00
Price: $143.70
You Save: $5.30 (4 %)
Holds two 100 ft. lengths of 2/0 cable. Includes holder tray for electrodes or miscellaneous items. For use with K1737-1 and K1770-1.
|
MSRP: $115.00
Price: $110.34
You Save: $4.66 (4 %)
Protect your machine when not in use. Made from attractive red canvas that is flame retardant, mildew resistant and water repellent.
|
MSRP: $116.00
Price: $111.63
You Save: $4.37 (4 %)
Connects the TIG Module to power sources. Connects 9 pin socket on the TIG module to 6-pin receptacle plus 115V plug.
|
MSRP: $113.00
Price: $109.06
You Save: $3.94 (3 %)
Provides a means to dock the TIG Module on top of a flat-roofed power source, or any other flat surface measuring at least 10 x 15 in. (254 x 381mm). It includes a latch and provisions for a user-supplied padlock to lock the TIG Module in place.
|
MSRP: $40.00
Price: $38.49
You Save: $1.51 (4 %)
Drive Roll and Guide Tube Kit for feeding .068 (1.8 mm) cored wire.
|
MSRP: $40.00
Price: $38.49
You Save: $1.51 (4 %)
Drive Roll and Guide Tube Kit for feeding 5/64 (2.0 mm) solid or cored wire.
|
MSRP: $36.00
Price: $34.64
You Save: $1.36 (4 %)
Drive Roll and Guide Tube Kit for feeding .035 (0.9 mm) or .045 (1.1 mm)solid wire.
|
MSRP: $48.00
Price: $46.19
You Save: $1.81 (4 %)
Attaches between muffler and exhaust elbow.
|
|
MSRP: $303.00
Price: $291.26
You Save: $11.74 (4 %)
Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the Afterflow cycle.
|
MSRP: $160.00
Price: $153.97
You Save: $6.03 (4 %)
Holds welding gas. Use one or two holders with K1770-1 undercarriage.
|
MSRP: $245.00
Price: $236.09
You Save: $8.91 (4 %)
Provides 25 ft (7.6m) of remote current control for TIG welding. (6-pin plug connection).
|
MSRP: $202.00
Price: $129.59
You Save: $72.41 (36 %)
This popular Magnum gun is intended for most .035.045 wire diameter applications in job shops, production or manufacturing. Standard equipment on the current Lincoln Power MIG 350MP wire feeder/welder.
|
MSRP: $83.40
Price: $53.51
You Save: $29.89 (36 %)
Magnum Parts Kits provide all the torch accessories you need to start welding. Parts Kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box. For PTW-18 and
|
MSRP: $2,990.00
Price: $2,922.91
You Save: $67.09 (2 %)
The Pro-Cut 55 is your top choice for industrial plasma cutting for HVAC, sheetmetal and light plate fabrication metalworking applications. Packed with patented features, the compact Pro-Cut generates 60 amps of cutting power capable of cutting conductive
|
MSRP: $162.00
Price: $103.93
You Save: $58.07 (36 %)
Light and easy to use, these torches give you the power of maximum versatility and maneuverability. A molded, knurled handle gives you a fast grip so you can focus on the weld. "F" model torches feature flexible heads to increase your comfort and get you
|
MSRP: $196.00
Price: $188.61
You Save: $7.39 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
|
MSRP: $265.00
Price: $255.34
You Save: $9.66 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.
|
MSRP: $835.00
Price: $803.22
You Save: $31.78 (4 %)
Remote weld output control box with two 120V AC receptacles having GFCI (ground fault circuit interrupter) protection. One cord for both remote and power. 100 ft. (30.5 m) length. Permits remote adjustment of weld output and power for tools (such as a gri
|
MSRP: $452.00
Price: $434.97
You Save: $17.03 (4 %)
Improves damage protection and includes built-in cable rack. Attaches to K1737-1 and K1770-1 undercarriages and K957-1 trailer.
|
MSRP: $1,529.00
Price: $1,471.71
You Save: $57.29 (4 %)
Supplies high frequency for superior starting, contactor control, remote control capability and a gas valve for AC or DC TIG welding (polarity selection dependent on output characteristics of power source). Rated at 300 amps/60% duty cycle. Requires 115V,
|
MSRP: $215.00
Price: $206.58
You Save: $8.42 (4 %)
Allows the TIG Module to be operated at distances up to 200 ft. from the power source.
| | |
Product Reviews
|
|
|