- $0.00 to $500.00
- $501.00 to $1,000.00
- $1,001.00 to $2,000.00
- $2,001.00 to $3,000.00
- $3,001.00 to $4,000.00
- $4,001.00 to $5,000.00
- $5,001.00 to $10,000.00
- $10,001.00 to $20,000.00
|
| | |
|
| |
| | |
|
|
Welders > Welders > Lincoln Invertec V350-PRO Factory Model (LIN K1728-6)
Lincoln Invertec V350-PRO Factory Model (LIN K1728-6)
|
|
Item Number: LIN K1728-6
Manufacturer: Lincoln Electric
Manufacturer Part No: K1728-6
|
|
The Invertec V350-PRO is a versatile, multi-purpose, multi-process power source thats lightweight and portable. The V350-PRO is capable of doing virtually any job, whether in the shop or on the construction site. The V350-PRO is capable of stick, DC TIG, MIG, flux-cored and arc gouging, making it the most versatile inverter power source in its class. And its built tough to handle the rigors of harsh environments. Great for construction, maintenance or shop welding.
All input voltages and frequencies are both single and three phase rated - no output derating necessary on single phase.
5-425 amp output range for all recommended processes from DC TIG to arc gouging.
Input voltage from 208-575 and 50 and 60 Hz operation - this one machine is capable of running on virtually any input power supply.
Touch-Start TIG for contamination-free starts.
Low power consumption for energy savings - 88% efficiency.
Parallel two units for 700A carbon arc gouging.
Includes Twist-Mate Cable Plugs (K852-70, quantity 2) for easy, tool-less cable connection.
Bright, large digital amp and volt meters are easy to monitor - even in sunlight - and presettable for precise procedure control.
Rugged skid and tube handles for convenience and added protection.
Manufactured under a quality system certified to ISO 9001 requirements and ISO 14001 environmental standards.
Three-year warranty on parts and labor. Two-year extended warranty available in the U.S.
Weight:81 lbs. (36.7 kgs. )
Dimensions (in) H x W x D : 14.8 x 13.3 x 27.9
Dimensions (mm) H x W x D : 376 x 338 x 709
|
|
|
|
| Processes
|
|
Stick, DC TIG, MIG, Flux-Cored, Gouging
|
|
Welding Specifications
| Rated CC DC Output Amps/Volts/Duty Cycle |
Rated CV Output Amps/Volts/Duty Cycle |
Output Range |
| 350/34/60%
|
350/34/60%
|
5-425A DC
|
|
|
|
MSRP: $911.00
Price: $876.36
You Save: $34.64 (4 %)
Innovative storage capabilities include wide full-length side trays, storage for contact tips, drive rolls, common tools and even your coffee cup! Includes instruction manual/procedures shelf. Load-bearing handles allow you to neatly wrap up work, gun and
|
MSRP: $112.00
Price: $107.78
You Save: $4.22 (4 %)
For stick welding. Includes 20 ft. (6.1m) #6 electrode cable with lug, 15 ft. (4.6m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode holder and sample pack of mild steel electrode.
|
MSRP: $548.00
Price: $527.35
You Save: $20.65 (4 %)
For stick welding. Includes 35 ft. (10.7m) 2/0 electrode cable with lug, 30 ft. (9.1m) 2/0 work cable with lugs, headshield, filter plate, work clamp and electrode holder.
|
MSRP: $952.00
Price: $916.14
You Save: $35.86 (4 %)
Field installed. Expands process capability of Factory Model to include Pulsed MIG. Designed for K1728-6 only.
|
MSRP: $81.00
Price: $78.27
You Save: $2.73 (3 %)
Needed if an Amptrol is not used when TIG welding. Comes with a 25 ft. (7.6m) cable. Attaches to the TIG torch for convenient finger control.
|
MSRP: $125.00
Price: $120.61
You Save: $4.39 (4 %)
Control Cable for the TIG Module. Connects 9-pin socket on TIG Module 14-pin receptacle.
|
MSRP: $135.00
Price: $129.59
You Save: $5.41 (4 %)
Accommodates CO2, Argon or Argon-blend gas cylinders. Includes a cylinder pressure gauge, dual scale flow gauge and 4.3 ft. (1.3mm) gas hose.
|
MSRP: $221.00
Price: $212.99
You Save: $8.01 (4 %)
Permits side-by-side mounting of two full size gas cylinders, with easy loading.
|
MSRP: $303.00
Price: $291.26
You Save: $11.74 (4 %)
Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the Afterflow cycle.
|
MSRP: $245.00
Price: $236.09
You Save: $8.91 (4 %)
Provides 25 ft (7.6m) of remote current control for TIG welding. (6-pin plug connection).
|
MSRP: $85.00
Price: $82.12
You Save: $2.88 (3 %)
Mounts inside the back of the V350-PRO. Controls gas flow into the V350-PRO through the Twist-Mate connector. Includes gas hose and solenoid. (Not compatible with construction model.)
|
MSRP: $196.00
Price: $188.61
You Save: $7.39 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
|
MSRP: $265.00
Price: $255.34
You Save: $9.66 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.
|
MSRP: $43.00
Price: $41.06
You Save: $1.94 (5 %)
Allows connection of one cable TIG torches to Square Wave TIG 275. For PTA-9/PTA-17.
|
MSRP: $60.00
Price: $57.74
You Save: $2.26 (4 %)
Twist-Mate Adapter for PTW-18 and -20 Torches.
|
MSRP: $43.00
Price: $41.06
You Save: $1.94 (5 %)
Allows connection of one cable TIG torches to Square Wave TIG 275. For PTA-26.
|
MSRP: $1,529.00
Price: $1,471.71
You Save: $57.29 (4 %)
Supplies high frequency for superior starting, contactor control, remote control capability and a gas valve for AC or DC TIG welding (polarity selection dependent on output characteristics of power source). Rated at 300 amps/60% duty cycle. Requires 115V,
|
MSRP: $325.00
Price: $313.08
You Save: $11.92 (4 %)
Get everything you need for TIG welding in one complete easy-to-order kit packaged in its own portable carrying case. Includes: PTA-17 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas hose, Twist-mate adapter, work clamp and cable.
|
MSRP: $372.00
Price: $357.99
You Save: $14.01 (4 %)
Get everything you need for TIG welding in one complete easy-to-order kit packaged in its own portable carrying case. Includes: PTA-17V torch, parts kit, Harris flowmeter/regulator, 10 ft. gas hose, and work clamp and cable.
|
MSRP: $425.00
Price: $409.31
You Save: $15.69 (4 %)
Get everything you need for TIG welding in one complete easy-to-order kit packaged in its own portable carrying case. Includes: PTW-20 torch, parts kit, Harris flowmeter/regulator, 10 ft. gas hose, Twist-Mate adapter, work clamp and cable, and 10 ft. wat
|
MSRP: $33.54
Price: $30.12
You Save: $3.42 (10 %)
Twist-Mate plug for connecting welding cable to output terminals. Contains one plug. For 1/0-2/0 (50-70 mm2) cable, up to 350 amp capacity.
|
MSRP: $27.40
Price: $24.61
You Save: $2.79 (10 %)
Twist-Mate plug for connecting welding cable to output terminals. Contains one plug. For 2/0-3/0 (70-95 mm2) cable, up to 400 amp capacity.
|
MSRP: $26.23
Price: $23.56
You Save: $2.67 (10 %)
Twist-Mate female plug for 1/0-2/0 (50-70 mm2) cable, up to a 350 amp capacity. 70 mm diameter.
|
MSRP: $26.23
Price: $23.56
You Save: $2.67 (10 %)
Twist-Mate female plug for 2/0-3/0 (70-95 mm2) cable, up to a 400 amp capacity. 95 mm diameter.
|
MSRP: $51.41
Price: $49.49
You Save: $1.92 (4 %)
For connection of lugged cable to Twist-Mate connectors (18" long).
|
MSRP: $126.00
Price: $80.84
You Save: $45.16 (36 %)
For connection of PTA-9 or PTA-17V torches (1 piece cable) to power sources without gas passing through the Twist-Mate connection.
|
MSRP: $147.00
Price: $143.70
You Save: $3.30 (2 %)
350 amps, 60% duty cycle with Twist-Mate connectors and Ground Clamp.
|
Product Reviews
|
|
|