- $0.00 to $500.00
- $501.00 to $1,000.00
- $1,001.00 to $2,000.00
- $2,001.00 to $3,000.00
- $3,001.00 to $4,000.00
- $4,001.00 to $5,000.00
- $5,001.00 to $10,000.00
- $10,001.00 to $20,000.00
|
| | |
|
| |
| | |
|
|
Control Modules
MSRP: $952.00
Price: $916.14
You Save: $35.86 (4 %)
Field installed. Expands process capability of Factory Model to include Pulsed MIG. Designed for K1728-6 only.
|
MSRP: $125.00
Price: $120.61
You Save: $4.39 (4 %)
Control Cable for the TIG Module. Connects 9-pin socket on TIG Module 14-pin receptacle.
|
MSRP: $155.00
Price: $148.84
You Save: $6.16 (4 %)
Extend your spool gun reach with a 25 ft. (7.5 m) control cable extension. Features a 7-pin female MS-type connector on the spool gun end and a 7-pin male MS-type connector on the power source end.
|
MSRP: $52.00
Price: $50.04
You Save: $1.96 (4 %)
Control Cable for the TIG Module. Connects 9-pin socket on TIG Module to 115V plug.
|
MSRP: $116.00
Price: $111.63
You Save: $4.37 (4 %)
Connects the TIG Module to power sources. Connects 9 pin socket on the TIG module to 6-pin receptacle plus 115V plug.
|
MSRP: $330.00
Price: $296.39
You Save: $33.61 (10 %)
Required for connection of SG Control Module (K488) to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0m). For Lincoln engine driven power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and lug power
|
MSRP: $301.00
Price: $289.98
You Save: $11.02 (4 %)
Digital display of amps and volts.
|
MSRP: $537.00
Price: $517.09
You Save: $19.91 (4 %)
Mounts on front of machine and provides polarity change or electrical isolation. Great for arc gouging applications and where two separate feeders require different output polarity or inductance settings. Not compatible with K1486-1 air filter.
|
MSRP: $626.00
Price: $562.00
You Save: $64.00 (10 %)
Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor.
|
MSRP: $484.00
Price: $465.77
You Save: $18.23 (4 %)
For use with Classic & Pipeliner engine-driven welders having a Wire Feed Module installed.
|
MSRP: $196.00
Price: $188.61
You Save: $7.39 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
|
MSRP: $265.00
Price: $255.34
You Save: $9.66 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.
|
Remote weld output control box with two 120V AC receptacles having GFCI (ground fault circuit interrupter) protection. One cord for both remote and power. 100 ft. (30.5 m) length. Permits remote adjustment of weld output and power for tools (such as a gri
|
MSRP: $105.00
Price: $101.37
You Save: $3.63 (3 %)
This timer allows you to set a fixed weld time of up to 10 seconds that is initiated when you pull the gun trigger. Ideal for making consistent spot welds on thin sheet metal.
|
MSRP: $1,529.00
Price: $1,471.71
You Save: $57.29 (4 %)
Supplies high frequency for superior starting, contactor control, remote control capability and a gas valve for AC or DC TIG welding (polarity selection dependent on output characteristics of power source). Rated at 300 amps/60% duty cycle. Requires 115V,
|
MSRP: $215.00
Price: $206.58
You Save: $8.42 (4 %)
Allows the TIG Module to be operated at distances up to 200 ft. from the power source.
|
MSRP: $161.00
Price: $155.25
You Save: $5.75 (4 %)
Adds 4-step trigger interlock, spot mode, adjustable run-in speed for smoother arc starting, and burnback time for controlled stopping. Easy to install.
| |
|
|
|