- $0.00 to $500.00
- $501.00 to $1,000.00
- $1,001.00 to $2,000.00
- $2,001.00 to $3,000.00
- $3,001.00 to $4,000.00
- $4,001.00 to $5,000.00
- $5,001.00 to $10,000.00
- $10,001.00 to $20,000.00
|
| | |
|
| |
| | |
|
|
Lincoln Air Vantage 500 (LIN K2325-2)
|
|
Item Number: LIN K2325-2
Manufacturer: Lincoln Electric
Manufacturer Part No: K2325-2
|
|
When you need it all, consider the rugged Air Vantage® 500 for railroad, mining, heavy-duty construction, and rental fleet use. A direct gear-driven compressor, with no belts or clutches to wear out, pumps out plenty of air for arc gouging with up to 3/8" carbons, plasma cutting or almost any air tool. A powerful 500 amps at 100% duty cycle is enough for almost any stick, TIG, MIG or flux-cored welding project. And, the precision arc starting provided by Lincoln Chopper Technology® and Touch-Start® DC TIG will make any operator a better welder. Don't pay extra for plenty of AC generator power - up to 20,000 watts of 3-phase and 12,000 watts of 1-phase is standard. Stainless steel roof and side panels provide added durability and corrosion-resistance. The Kubota® V3600-T water-cooled diesel engine will keep you running - and working - for a long time.
Rotary Screw Compressor
- VMAC® brand rotary screw direct-drive air compressor rated at 60 CFM, 100 PSI, 100% duty cycle, delivers abundant air for arc gouging with up to 3/8" carbons, plasma cutting (plasma cutter sold separately) and air tools such as an impact gun.
Multi-Process Welding, Separate Arc Gouge Mode
- Select one of five Process Modes, including CC-Stick, Downhill Pipe (for stick), Touch-Start® DC TIG, CV-Wire or new Arc Gouging mode which maximizes output with up to 3/8" carbon rods.
VRD Voltage Reduction Device
- Reduced OCV in the CC-Stick weld mode for added safety.
Plenty of AC Generator Power
- 20 kW continuous 3-phase 240V AC generator power will operate industrial equipment such as plasma cutters, pumps, inverter welders and grinders.
- 12 kW continuous 1-phase AC generator power for common construction tools and lights.
Sealed GFCI Modules
- GFCI (Ground Fault Circuit Interrupters) are sealed from moisture for more reliable operation.
Stainless Steel Enclosure
- Standard stainless steel roof, side panels and engine-access door deliver added protection, durability and corrosion-resistance. Eliminates need to replace these items due to paint damage or rust.
Sliding Engine-Access Door
- Lockable engine-access door slides open for easy access in tight spaces.
Relibable Engine
- 4 cylinder 1800 RPM Kubota® turbo-charged diesel engine runs smooth and quiet.
Weight:1850 lbs. (839 kgs. )
Dimensions (in) H x W x D : 49 x 32.7 x 63.1
Dimensions (mm) H x W x D : 1245 x 831 x 1603
|
|
|
|
| Processes
|
|
Stick, TIG, MIG, Flux-Cored, Gouging
|
|
Welding Specifications
| Rated CC DC Output Amps/Volts/Duty Cycle |
Rated CV Output Amps/Volts/Duty Cycle |
Output Range |
500/40/100%
550/36/60%
575/35/50%
|
500/40/100%
550/36/60%
575/35/50%
|
30-575A DC
40-300A Pipe
20-250A DC TIG
14-40V CV
|
Engine Specifications
| Type of Engine |
Cylinders |
HP & Speed (rpm) |
Generator Output |
Fuel Type |
| Kubota V3600-T EPA Tier 4i Turbo Diesel
|
4
|
58@1850
|
3-PH: 20 kW
1-PH: 12 kW
|
Diesel
|
|
|
|
MSRP: $548.00
Price: $527.35
You Save: $20.65 (4 %)
For stick welding. Includes 35 ft. (10.7m) 2/0 electrode cable with lug, 30 ft. (9.1m) 2/0 work cable with lugs, headshield, filter plate, work clamp and electrode holder.
|
MSRP: $330.00
Price: $296.39
You Save: $33.61 (10 %)
Required for connection of SG Control Module (K488) to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0m). For Lincoln engine driven power sources with 14-pin MS-type connection, separate 115V NEMA receptacles and lug power
|
MSRP: $40.00
Price: $38.49
You Save: $1.51 (4 %)
Drive Roll and Guide Tube Kit for feeding .068 (1.8 mm) cored wire.
|
MSRP: $40.00
Price: $38.49
You Save: $1.51 (4 %)
Drive Roll and Guide Tube Kit for feeding 5/64 (2.0 mm) solid or cored wire.
|
MSRP: $36.00
Price: $34.64
You Save: $1.36 (4 %)
Drive Roll and Guide Tube Kit for feeding .035 (0.9 mm) or .045 (1.1 mm)solid wire.
|
MSRP: $303.00
Price: $291.26
You Save: $11.74 (4 %)
Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the Afterflow cycle.
|
MSRP: $245.00
Price: $236.09
You Save: $8.91 (4 %)
Provides 25 ft (7.6m) of remote current control for TIG welding. (6-pin plug connection).
|
|
MSRP: $202.00
Price: $129.59
You Save: $72.41 (36 %)
This popular Magnum gun is intended for most .035.045 wire diameter applications in job shops, production or manufacturing. Standard equipment on the current Lincoln Power MIG 350MP wire feeder/welder.
|
MSRP: $626.00
Price: $562.00
You Save: $64.00 (10 %)
Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor.
|
MSRP: $708.00
Price: $681.32
You Save: $26.68 (4 %)
The Magnum SG a lightweight, well balanced semiautomatic spool gun designed for easy and reliable aluminum wire feeding with a variety of CV power sources and engine-driven welders. Rated 250 amps @ 60%, the Magnum SG features a generous 25 ft (7.5 m)
|
MSRP: $83.40
Price: $53.51
You Save: $29.89 (36 %)
Magnum Parts Kits provide all the torch accessories you need to start welding. Parts Kits provide collets, collet bodies, a back cap, alumina nozzles and tungstens in a variety of sizes, all packaged in an easy to carry reclosable box. For PTW-18 and
|
MSRP: $2,348.00
Price: $2,295.47
You Save: $52.53 (2 %)
The Precision TIG 225 gives you the 'Power to Perform', for general fabrication, automotive/motorsports, vocational schools or serious hobby work. Micro-Start II Technology delivers precision arc performance to improve arc starting, welding and weld cra
|
MSRP: $2,990.00
Price: $2,922.91
You Save: $67.09 (2 %)
The Pro-Cut 55 is your top choice for industrial plasma cutting for HVAC, sheetmetal and light plate fabrication metalworking applications. Packed with patented features, the compact Pro-Cut generates 60 amps of cutting power capable of cutting conductive
|
MSRP: $196.00
Price: $188.61
You Save: $7.39 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 25 foot cable length.
|
MSRP: $265.00
Price: $255.34
You Save: $9.66 (4 %)
Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote control Amphenol. 100 foot cable length.
|
MSRP: $835.00
Price: $803.22
You Save: $31.78 (4 %)
Remote weld output control box with two 120V AC receptacles having GFCI (ground fault circuit interrupter) protection. One cord for both remote and power. 100 ft. (30.5 m) length. Permits remote adjustment of weld output and power for tools (such as a gri
|
MSRP: $124.00
Price: $119.33
You Save: $4.67 (4 %)
Easily mounts to standard Muffler.
|
Product Reviews
|
|
|